Fixed wall mounted slewing jib crane
Product Description
Fixed wall mounted slewing jib crane offer a lower cost design with the greatest potential clearance under the boom.
2.Jib crane has a horizontal jib supporting a movable hoist, is fixed to a wall or to a floor-mounted pillar. The jib may swing through an arc, to give additional lateral movement, or be fixed.
3.This crane can move loads around corners, reach into machines or exit, and swing under obstructions.
4.This crane is perfect in applications that require an operator to rotate the jib in close to the pivot point.
5.Capacities: Wall mounted is 0.125 ~1 Ton, With spans up to 5 meters.
6.180 degree rotation for wall mounted
7.Suited for applications where perating around obstacles or swinging under obstructions is necessary
8.Manual swing and motorized swing
Advantages
(1)Simple installation Wall mounted jib cranes can be mounted on wall, no special floor space required.
(2)Shorten loading time, improve work efficiency With a jib crane, workers can lift, quickly transport and precisely deposit all kinds of work pieces at any time.
(3)Wall Mounted Jib Crane is Easy handing, lighten laboring work .It can relieve the strain of physically demanding work on your staff. The risk of injuries or accidents when handing heavy or unwieldy parts is considerably reduced.
(4)High quality with good price
Application
Wall Mounted Jib Crane is suitable to work in the dock, warehouse, workshop etc fixed working conditions. It can work within the 360 degrees to lift and materials handling.
Working Envirenment:
1). Power source is three-phase alternating current, rated frequency is50HZ,rated voltage is 380v.
2). the altitude height of site is ought to be less than 2000m
3). Flammable explosive and corrosive gas are forbidden in the work environment
4). The crane is forbid to lift molten metal, explosives, poison and corrosives
Technical Parameter
item | specifications | ||||||||||
capacity | t | 0.5 | 1 | 2 | 3 | 5 | 10 | 16 | 20 | ||
Arm length | m | 1.2-20 | |||||||||
Lifting height | m | 1-15 | |||||||||
Lifting speed | m/min | 3.5/7/8 | |||||||||
Travelingspeed | m/min | 20/30 | |||||||||
Rotate speed | r/min | 0.7 | |||||||||
Rotate angle | degree | 360° | |||||||||
Wire rope | mm | Ø4.7 | Ø7.7 | Ø11 | Ø13 | Ø15.5 | Ø15.5 | Ø17.5 | Ø22.5 | ||
Power source | 3-phase, 380v50Hz OR as required |